Products > Homag Spare parts

4008400257 Homag 4-008-40-0257 SenoTec Glue Level Sensor

4008400257 Homag 4-008-40-0257 SenoTec Glue Level Sensor

• SenoTec 130 141 D1Q-2x3/13L12 sensor
• HOMAG 4-008-40-0257 glue level sensor
• SenoTec 130 141 sensor
• Glue level sensor for Homag edgebander
• 4-008-40-0257 Homag sensor
• Senotec immersion probe for Homag
• Glue level sensor for edgebanding glue pot
• Homag glue tank level sensor
INQUIRY

4008400257 Homag 4-008-40-0257 SenoTec Glue Level Sensor

This spare part is SenoTec 130 141 glue level sensor D1Q-2X3/13L12. This sensor can be used on Homag edge bander. Homag replacement part number is 4008400257 or 4-008-40-0257.

Homag glue level sensor.jpg

SenoTec is the market leader in glue monitoring of edge band gluing machines.
SenoTec 130 141.jpg

D1Q-2x3:13L12.jpg

This level sensor is used for glue level detection. The glue level sensor is an important part of premelt-adhesive systems in woodworking edgebanding machines. The pre melt-adhesive systems consist of a storage tank, a granulate tank for premelting, and a small glue pot. In the tank for premelting, glue granules are melted under low heat so that it liquefies and runs into the glue pot. In the glue pot, the glue is heated to its final temperature and is led onto the glue roller by a conveyor device. A glue level sensor ensures that only the required amount of glue is melted.
SenoTec 130 141.jpg

glue level sensor Homag.jpg

RicoCNC carries a comprehensive range of edge banding accessories, such as rubber pressure wheels, feed track pads, buffing wheels, glue pots, glue level sensors, and other woodworking machine parts.
Homag 4-008-40-0257 sensor.jpg