Products > CNC Router Bits

Triple 3 Flutes Carbide Up-cut Spiral Router Bit End Mill Cutters for Wood

Triple 3 Flutes Carbide Up-cut Spiral Router Bit End Mill Cutters for Wood

• Solid carbide up cut 3 flute spiral bits
• 3 flute up cut spiral end mill
• 3 flute spiral up-cut
• Triple-flute upcut spiral router bit
• 3 flutes helix router bit
• 3 flute CNC finisher spiral router bits
• CNC router bits end mill for wood
• Spiral 3 flute plunge cnc router bits
INQUIRY

3 flute up cut bits.jpg

Triple 3 Flutes Carbide Up-cut Spiral Router Bit End Mill Cutters for Wood

Up Cut spirals 1 or 2 or 3 flutes are used where upward chip removal and a good finish on the bottom is required.
3 flute spiral end mill.jpg

Up cut spirals feed the chips (chip clearance) toward the router and are therefore useful for mortising and cutting dado's.
CNC Finisher Spiral 3 Flute bits.jpg

Up-cut end mills direct wood chips up and away from the milling area leaving an unobstructed path for the endmill. Bit breakage is less likely. It is the best choice for most standard milling applications.
3 flute spiral bits.jpg

3 Flutes Up-cut Spiral Router Bits BENEFITS:
Ideal for penetrating hard-to-route materials under reduced spindle speeds or horsepower
Up cut yields superior chip removal and a smooth finish
Balanced cutting with minimal vibration
Solid carbide for durability
Recommended for CNC or router table use
Triple Flute Spiral bits.jpg

Solid Carbide Spiral 3 Flute Plunge CNC Router Bits.jpg

3 Flutes Carbide Up-cut Spiral Bit: (for wood cutting)

helix spiral flute bits.jpg

Item No.	CED (mm)	CEL (mm)	SHK (mm)	OVL (mm)
N3LX3.08	3.175	8	3.175	38
N3LX3.12	3.175	12	3.175	38
N3LX3.15	3.175	15	3.175	38
N3LX3.17	3.175	17	3.175	38
N3LX3.22	3.175	22	3.175	45
N3LX3.25	3.175	25	3.175	50
N3LX412	4	12	4	40
N3LX417	4	17	4	40
N3LX422	4	22	4	45
N3LX425	4	25	4	50
N3LX512	5	12	5	45
N3LX517	5	17	5	50
N3LX522	5	22	5	50
N3LX612	6	12	6	45
N3LX617	6	17	6	50
N3LX622	6	22	6	50
N3LX625	6	25	6	55
N3LX628	6	28	6	55
N3LX632	6	32	6	60
N3LX635	6	35	6	70
N3LX642	6	42	6	80
N3LX652	6	52	6	90
N3LX672	6	72	6	110
N3LX6422	4.0	22	6	55
N3LX6522	5.0	22	6	55
N3LX6.22	6.35	22	6.35	50
N3LX6.35	6.35	35	6.35	70
N3LX825	8	25	8	60
N3LX835	8	35	8	80
N3LX845	8	45	8	90
N3LX1025	10	25	10	70
N3LX1035	10	35	10	80
N3LX1045	10	45	10	90
N3LX12.35	12.7	35	12.7	80
N3LX12.45	12.7	45	12.7	90
N3LX12.55	12.7	55	12.7	100
N3LX1645	16	45	16	100
N3LX1655	16	55	16	110
N3LX2075	20	75	20	150

Spiral Upcut Bit.jpg
RicoCNC also can supply CNC router bits, such as: Ball nose Carving Bits, Two Flutes Carbide Up-cut Spiral Bit, Single Flute Acrylic Cutting Bits: (specially for acrylic cutting), CNC Router Bits for Aluminium Cutting, 2 Flutes Compression Router Bits, 3 Flute Compression Solid Carbide CNC Router Bits, TCT double straight flutes router bits, Single Flute Spiral Router Bits, Straight Plunge Router Bits, 3 Flutes Chip-Breaker Spiral Bits, Conical ball nose router bits, Down Spiral Router Bit, etc.
3 flutes helix router bit.jpg